v Purpose
: Can replace the mainboard has been damage an
is also classified as the type of the old mainboard.
v Scope
: This procedure fixied by technition.
v Keyword
: Mainboard,screw,cassing.
v Instruction :
1) Prepare a complete tools such as
screwdrivers min and plus.
2) Prepare the parts to replace the
damage component (New Mainboard).
3) First.disconnect all elektrical flow
is stil connected by disconnecting the plug that connects to the cpu or power
supply.
4) Next,remove the screws that are on the
cassing.srew located on the back right side.
5) Than remove the cover by pulling the
cassing to the right of backward slightly and open up.
6) Then disconnect all the cables are
mounted directly on the mainboard
after the release
of components such as RAM, VGA, and must let loose regardless processor heatsink after
first carefully because
these components are easily damaged
because the processor is easily broken leg next
release latch and
lift the first processor in parallel in order
leg is not broken
or bent processor.
7) After that, remove all the screws on
the mainboard and remove the mainboard and
replace it with a new plug sequentially as
when removing.
8) Finally we check whether
the next time the computer will
boot properly turn
what if what
is already well underway when the installation is
correct.
v Monitoring :
1) Before technician perform repairs to first
under stand about the procedure replace
2) And technicians fill the employ ment report
v CORRECTIVE ACTION : if the hard drive is not readable anymore then
the technician must examine whetter the socket is already plugged in
motherboard
v VERIFICATION AND RECORD KEEPING :
technician must record , the execution on time improvements , and the tools
used during the implementation of the work.
